Flexibly adaptable
Flexibly adaptable to your needs and requirements: from working load limit (WLL) and platform size to visual design.
the most common variants ...
Get a free offer for your freight lift in two steps. You are welcome to note any adjustments (e.g. a different payload or different dimensions) in the 'Change requests' field.
| Payload: | 1.000 | kg |
| Width: | 1.500 | mm |
| Length: | 2.000 | mm |
| Effective Stroke: | 3.000 | mm |
| Payload: | 1.000 | kg |
| Width: | 1.000 | mm |
| Length: | 1.500 | mm |
| Effective Stroke: | 4.300 | mm |
| Payload: | 1.000 | kg |
| Width: | 1.480 | mm |
| Length: | 2.520 | mm |
| Effective Stroke: | 3.360 | mm |
| Payload: | by request |
| Width: | by request |
| Length: | by request |
| Effective Stroke: | by request |
What can be transported with a freight lift?
Our freight lifts are only designed to transport of goods without a person riding along on the lift. With a working load limit (WLL) of up to 4 tons and customised platform sizes, they can be flexibly adapted to handle the goods to be transported. As our freight lifts are designed for use in industrial environments, they are extremely robust and can be found in production, warehouses, restaurants, car dealerships and theatres.
[up]
Which designs are possible for the freight lift?
The designs are not determined by the type of building and depend on their intended use and the installation site. Our freight lifts can be adapted to meet your needs in terms of size, design and operating options . Whether the freight lift needs to be installed in an existing shaft, as a free-standing structure or in a shaft frame made of sandwich panels, we have the right solution. The lift can stop at a total of up to 3 landings. Depending on the location of the access point, the freight lift can be supplied as a front-and-rear-opening lift (doors are opposite each other), with corner-loading access (doors are diagonally across) or with a loading point on one side . Every landing has an operating panel to control the transportation of up to 4 tons at the push of a button. To make your daily transport tasks even easier, we also have a wide range of accessories (e.g. ramps if no pit can be constructed).
[up]
From design to installation
In addition to consulting and design, we can also install the freight lift for you at your premises. The advantage for you is that you can rest assured that your freight lift will be installed professionally so that nothing stands in the way of safe operation.<br/> Please note, however, that on-site preliminary work on parts of the building is not included in our scope of services and is the responsibility of the customer. These include:
- The laying and connection of supply lines.
- The provision of a suitable subfloor/foundation.
- Masonry, concreting, breaking work, plastering and earthwork.
We will of course provide you with all the documents relating to the freight lift to enable you to carry out any construction work that may be necessary. For example, if a pit installation is required, you will receive the appropriate pit drawing with the correct dimensions once the order has been placed.<br/> Simply give us a call to arrange for detailed information on our installation services.
[up]
Do you have any further questions?
You must certainly be interested in the prices of our freight lifts. As the equipment of every freight lift must be adapted to the structural conditions, it is unfortunately not possible to quote all-inclusive prices. Our modular design approach allows us to provide inexpensive solutions and we can send you a tailor-made offer after a short consultation or based on the information in your enquiry.
[up]
Frequently asked questions & our answers ...
Where is the headquarters of Janzen Lifttechnik GmbH?
We are at home in the rural Emsland, more precisely in Niederlangen a part of the Lathen municipality directly on the A31 motorway. This means that we are roughly halfway between North Rhine-Westphalia and the North Sea, right on the Dutch border.
Our region is known, among other things, for the various nature reserves, the well-developed cycle paths, the manufacture of cruise ships, as well as the headquarters of various distilleries.
Should you ever come to our region, we look forward to a visit in our Plant.
Where are the lifting tables and elevators produced?
With us, not only does the final assembly take place in Germany, but we also cover the entire production chain from construction through steel construction to final assembly in our plant in Niederlangen. With us you get a real 'Made in Germany'.
Is the offer aimed only at traders or also at private individuals?
Even if our products are mainly used in an industrial environment, we naturally also offer them to private individuals.
Just give us a call or send us an inquiry and we will be happy to contact you.
Will I receive a drawing before production starts?
In any case. To ensure that you get the product that you really want, we provide you with an approval drawing before production begins. In addition to the actual product, this also includes the installation situation. As the saying goes, a picture is worth a thousand words.
Can I get a CAD model?
You can receive a (greatly) simplified CAD model of our standard products before ordering. After the order and the construction phase, we can also provide you with CAD models of the individual special lifting tables. A data exchange is possible in all common formats (.stp, .dxf, .dwg etc.).
Where can you deliver to?
We produce our lifting tables and column jacks in accordance with European standards and guidelines. Accordingly, our sales area is limited to all countries that recognize these standards and guidelines (e.g. the members of the European Union, Switzerland and Australia).
Is it possible to assemble in the same area?
On request, we assemble our systems throughout Germany, as well as in the neighboring countries of Germany.
