- Transportation of goods
from 500 kg to 4,000 kg
- For delivery heads up to 8 metres
accessing several levels
- Customised dimensions
tailored to the structural conditions
Get advice now or enquire directly:
Jetzt beraten lassen oder direkt anfragen:
100% quality control
Every hydraulic lift is unique. Every lift is subjected to strict testing after completion to ensure consistent product quality.
Every enquiry is checked and processed by an experienced employee so that you get the ideal hydraulic lift that meets your needs.
the most common variants ...
Get a free offer for your hydraulic lift in two steps. You are welcome to note any adjustments (e.g. a different payload or different dimensions) in the 'Change requests' field.
|Effective Stroke:||by request|
When does it make sense to use a hydraulic lift?
When goods weighing more than 500 kg need to be transported to different levels, our hydraulic lifts become an option to be considered. Height differences of up to 8 metres can be overcome. Simplified goods lifts are often used in industrial halls or storage facilities. They are also suitable to transport all kinds of items in laundries, theatres or hotels. Almost all conceivable goods can be transported with them.
Have a look at the most important points of reference for purchasing our goods lifts below to check whether our hydraulic lift is suitable for your application:
- You are looking for a customisable, inexpensive solution.
- You only need it to transport goods.
- The delivery head is a maximum of 8 metres.
- The load weighs between 500 kg and 4,000 kg.
- You value robust, durable products.
- A low-maintenance design is important to you.
If you are unsure whether we do have the right hydraulic lift for you, we will be happy to advise you.
Why do we supply hydraulic lifts only for the transportation of loads?
Because we are a lift table manufacturer , we produce according to the DIN EN 1570 standard "Safety requirements for lift tables". The moment a person rides along on the lift table and exits it at the top landing, other safety standards apply. This significantly increases the purchase and maintenance costs. Reasons for this are, among other things, higher design and construction costs, installation of additional safety components and more extensive testing requirements. As cost pressure is increasing in almost all areas nowadays, we have specialised in the manufacture of simplified goods lifts. They are a cost-effective solution when goods need to be transported up to a delivery head of 8 metres.
Optimum price-performance ratio
We focus on functionality in the design of our simplified goods lifts. This enables us to offer attractive prices. The robust and easy to maintain technology as well as the low operating costs are further arguments for our products.
Because our goods lifts are almost exclusively custom-made, it is not possible to provide general prices. Prices are influenced by the following factors:
- Required load capacity, delivery head and equipment.
- Power and speed.
- Installation site.
Having us as the manufacturer is beneficial to you as builder-owner, architect or designer. From design and installation to maintenance and service, you will find us a knowledgeable and skilled partner. We offer tailor-made and customised solutions. If you are interested in an exact price, we would be happy to make you an offer. We look forward to your enquiry.
Frequently asked questions & our answers ...
Where is the headquarters of Janzen Lifttechnik GmbH?
We are at home in the rural Emsland, more precisely in Niederlangen a part of the Lathen municipality directly on the A31 motorway. This means that we are roughly halfway between North Rhine-Westphalia and the North Sea, right on the Dutch border.
Our region is known, among other things, for the various nature reserves, the well-developed cycle paths, the manufacture of cruise ships, as well as the headquarters of various distilleries.
Should you ever come to our region, we look forward to a visit in our Plant.
Where are the lifting tables and elevators produced?
With us, not only does the final assembly take place in Germany, but we also cover the entire production chain from construction through steel construction to final assembly in our plant in Niederlangen. With us you get a real 'Made in Germany'.
Is the offer aimed only at traders or also at private individuals?
Even if our products are mainly used in an industrial environment, we naturally also offer them to private individuals.
Just give us a call or send us an inquiry and we will be happy to contact you.
Will I receive a drawing before production starts?
In any case. To ensure that you get the product that you really want, we provide you with an approval drawing before production begins. In addition to the actual product, this also includes the installation situation. As the saying goes, a picture is worth a thousand words.
Can I get a CAD model?
You can receive a (greatly) simplified CAD model of our standard products before ordering. After the order and the construction phase, we can also provide you with CAD models of the individual special lifting tables. A data exchange is possible in all common formats (.stp, .dxf, .dwg etc.).
Where can you deliver to?
We produce our lifting tables and column jacks in accordance with European standards and guidelines. Accordingly, our sales area is limited to all countries that recognize these standards and guidelines (e.g. the members of the European Union, Switzerland and Australia).
Is it possible to assemble in the same area?
On request, we assemble our systems throughout Germany, as well as in the neighboring countries of Germany.