This classic dock lift table is designed for loading and unloading vehicles at a loading dock. With a load capacity of 2,000 kg and a lifting height of 1,200 mm, the system represents a typical configuration for loading and unloading operations.
Features of the Dock Lift Table for Loading Dock Operations
The dock lift table shown is equipped with various features and safety measures designed for loading and unloading vehicles at a loading dock:
- Loading Flaps: These bridge the gap between the lift table platform and the vehicle's loading area, allowing goods to be transferred safely.
- Hot-Dip Galvanising: The platform, superstructure and base frame are hot-dip galvanised to protect against corrosion. The control system has an IP65 protection rating.
- Biodegradable Hydraulic Oil: Biodegradable hydraulic oil is used to reduce the potential environmental impact in the event of a leak.
- Removable Guardrails: The guardrails on the long sides of the platform can be removed, allowing vehicles to drive over the lift table when it is lowered. The system is designed for a wheel load of 1,000 kg. An electrical monitoring system prevents the platform from being raised unless the removable guardrails are in place.
- Underrun Protection: Welded wire mesh panels on the accessible sides of the platform help prevent access to the hazardous area beneath the lift table.
The system shown is an example of a dock lift table used for loading and unloading at a loading dock. Depending on the installation conditions and transport requirements, the load capacity, platform dimensions and features can be individually customised.
For more information on the available configurations, please visit our dock lift tables product page.
