In the event of a fault, the status data from the lift table sensors provides valuable information for quick and targeted fault diagnosis. To make this access easier, we equip larger control units - for example for underground lifts or goods lifts - with a Wi-Fi module.
The following brief instructions will show you how to establish the connection to the control unit.
Step-by-step instructions: Establishing a Wi-Fi connection to the control unit
- Select the Wi-Fi network:
- Open the Wi-Fi settings on your laptop, tablet or smartphone.
- Select the Janzen_Lifttechnik_WLAN network.
- Establish a Wi-Fi connection:
- Enter the Wi-Fi password provided.
- Confirm the connection by clicking on “Connect”.
- Call up the user interface:
- Open an internet browser and enter the address https://192.168.247.60.
- Alternatively, you can scan the following QR code:
- Logging in via the EATON interface
- The EATON user login page opens.
- Click on Guest login to continue.
- Display status and error data
- Under the menu item Anzeige, you will find the current status and error messages of the control unit.
- The menu item Operanten shows under I all inputs and under Q all outputs of the control unit.
- To obtain further information on the respective inputs or outputs, activate the Kommentare anzeigen function in the upper area.
Do you need more information?
If you have any questions about the Wi-Fi connection or using the user interface, we will be happy to help you:
? Phone: +49 5939 96796-90
? E-mail: info@j-lifte.com
Reading tip
BERNSTEIN AG has published an interesting article on the subject of Wi-Fi access for lift tables:
Reaching high at the airport - not only on the runway shows how Wi-Fi access was successfully implemented with the BERNSTEIN SCR P evaluation system and the EATON easyE4 control relay on our loading lift table.
Comments (0)
No comments found!