100% quality control
Whether you order one or twenty scissor lift tables is not crucial: Each single lift table is subjected to a strict test.
Enquire about the most common variants
Get a free quote for your lift table in just two steps. Feel free to note any customizations, such as a different payload or dimensions, in the 'Change requests' field.
| Payload: | 2,000 | kg |
| Width: | 2,300 | mm |
| Length: | 2,300 | mm |
| Effective Stroke: | 1,200 | mm |
| Payload: | 2,000 | kg |
| Width: | 1,000 | mm |
| Length: | 1,500 | mm |
| Effective Stroke: | 1,600 | mm |
| Payload: | by request |
| Width: | by request |
| Length: | by request |
| Effective Stroke: | by request |
Standard equipment
Thanks to its high-quality and robust construction, the depicted lift table is capable of effortlessly lifting and lowering loads of up to 2,000 kg. The scissor lift table comes equipped with the following features as standard:
- CEE plug (16 A), allowing the lift table to be directly connected to an electrical outlet;
- leveling feet on the subframe to compensate for minor floor unevenness;
- mounting bolts to relieve stress on the scissors in the lowered position;
- 5 m supply line for manual operation;
- heavy-duty dowels or adhesive anchors for mechanical anchoring in the floor.
The platform dimensions and lifting height can be customized to meet your needs. Furthermore, the functionality of our standard lift tables can be easily expanded with our lift table accessories.
In the following section, you will find common use cases for lift tables with a load capacity of 2,000 kg:
Application as a work lift table
Lift tables with a load capacity of 2,000 kg are commonly used for material handling or assembly tasks. Depending on the intended use, the following additional features are in demand:
- A chassis to make the work lift table flexible and usable in various locations.
- A roller conveyor to facilitate work on conveyors or production lines.
- Mass eyes and high-pressure filters for welding lift tables.
Feel free to take a look at our lift table accessories to explore the diverse possibilities.
In the following video, you'll see a great example of a work lift table with a load capacity of 2,000 kg and a rotary platform:
Usage as a loading lift table
Another classic application for lift tables with a load capacity of 2,000 kg is the loading and unloading of trucks. For use as a loading lift table, the following accessories are typically required:
- Platform with chequer plate
- Loading flaps
- Railings and portal on the platform
- Underrun protection
- For outdoor use: galvanized platform and subframe
Application as a system lift table
To meet the demands of a demanding 3-shift operation, we equip our 2,000 kg lift tables with the following extras:
- Greaseable bearings
- Hardened rollers
- Compact unit with high duty cycle
The additional features ensure reliable performance even under heavy usage.
In the following example, we present a system lift table designed for high cycle rates:
Haven't found what you're looking for yet?
Thanks to our extensive range of accessories, we are capable of providing various lift table solutions for different loading and assembly situations. Other load capacities and platform dimensions are also not a problem for us.
Perhaps an underground lift or a goods lift might be of interest to you?
We are more than happy to assist you. You can reach us by phone at +49 5939 96796-90 or feel free to send us a message via email at info@j-lifte.com. We look forward to hearing from you.
Frequently asked questions & our answers ...
Where is the headquarters of Janzen Lifttechnik GmbH?
We are at home in the beautiful Emsland, more precisely in Niederlangen a member community of the joint community Lathen directly on the A31 motorway. This means that we are roughly halfway between North Rhine-Westphalia and the North Sea, right on the Dutch border.
Our region is known, among other things, for the various nature reserves, the well-developed cycle paths, the manufacture of cruise ships, as well as the headquarters of various distilleries.
Should you ever come to our region, we look forward to a visit in our plant.
Where are the lift tables and lifts produced?
With us, not only does the final assembly take place in Germany, but we also cover the entire production chain from construction through steel construction to final assembly in our plant in Niederlangen. With us you get a real 'Made in Germany'.
Is the offer aimed only at traders or also at private individuals?
Even if our products are mainly used in an industrial environment, we naturally also offer them to private individuals.
Just give us a call or send us an enquiry and we will be happy to contact you.
Will I receive a drawing before production starts?
In any case. To ensure that you get the product that you really want, we provide you with an approval drawing before production begins. In addition to the actual product, this also includes the installation situation. As the saying goes, a picture is worth a thousand words.
Can I get a CAD model?
After ordering and the design phase, we are pleased to provide you with CAD models. Data exchange is possible in all common formats, including .stp, .dxf, .dwg, etc.
Where can delivery of the products be made?
We produce our lift tables and column lifts in accordance with European standards and guidelines. Accordingly, our sales area is limited to all countries that recognize these standards and guidelines (e.g. the members of the European Union, Switzerland and Australia).
For which countries is the assembly service available?
On request, we assemble our systems throughout Germany, as well as in the neighboring countries of Germany.
