100% quality control
Whether you order one or twenty scissor lift platforms is not crucial: Each single lift table is subjected to a strict test.
Enquire about the most common variants
Get a free quote for your scissor lift platform in just two steps. Feel free to note any customizations, such as a different payload or dimensions, in the 'Change requests' field:
| Payload: | 2,800 | kg |
| Width: | 2,300 | mm |
| Length: | 2,300 | mm |
| Effective Stroke: | 1,200 | mm |
| Payload: | 1,000 | kg |
| Width: | 1,000 | mm |
| Length: | 1,400 | mm |
| Effective Stroke: | 1,600 | mm |
| Payload: | by request |
| Width: | by request |
| Length: | by request |
| Effective Stroke: | by request |
Benefits of hydraulic lift tables
Hydraulic scissor lift tables have proven themselves in everyday life for decades, whether in production, logistics, the service sector, or for private use. This can be attributed to a range of advantages over other designs. Low wear and tear, cost-effective drive components, and high flexibility are just a few of them.
For a more detailed analysis of the pros and cons of hydraulic lift tables, you can refer to our article 'Hydraulic lift tables: pros & cons'.
Versatile applications through standard components
As mentioned earlier, one of the advantages of hydraulic lift tables lies in their high flexibility. The functionality can be easily expanded using standardized components. Whether you need to rotate, tilt, and/or move loads, we offer the appropriate assembly for all application areas.
For an initial overview of the various equipment options, you can visit our 'Lift table accessories' page.
Usage even under extreme conditions
Our hydraulic lift tables can be designed to operate under extreme conditions. Whether your scissor lift platform is used as an ATEX lift table in a Zone 2 potentially explosive atmosphere or as a system lift table that needs to withstand demanding multi-shift operations, we customize the scissor lift platform accordingly to make it suitable for your application.
Just let us know the purpose of your table, and we will provide you with the right scissor lift platform solution.
The path to the right scissor lift
To ensure that you receive the suitable scissor lift platform, we follow a well-known saying: 'A picture is worth a thousand words.'
After placing your order, you will receive an approval drawing from us, outlining all the essential aspects of your request, ranging from the actual scissor lift table to the on-site installation situation.
This allows you to confirm that your requirements are accurately implemented.
Everything from a single source
As a lift table manufacturer, we provide you with comprehensive service: from initial consultation through design and steel construction to on-site installation.
The advantage for you: You have a knowledgeable contact person for all matters related to lift tables & goods lifts.
Feel free to reach us by phone at +49 5939 96796-90 or send us a message at info@j-lifte.com. We look forward to hearing from you.
Frequently asked questions & our answers ...
Where is the headquarters of Janzen Lifttechnik GmbH?
We are at home in the beautiful Emsland, more precisely in Niederlangen a member community of the joint community Lathen directly on the A31 motorway. This means that we are roughly halfway between North Rhine-Westphalia and the North Sea, right on the Dutch border.
Our region is known, among other things, for the various nature reserves, the well-developed cycle paths, the manufacture of cruise ships, as well as the headquarters of various distilleries.
Should you ever come to our region, we look forward to a visit in our plant.
Where are the lift tables and lifts produced?
With us, not only does the final assembly take place in Germany, but we also cover the entire production chain from construction through steel construction to final assembly in our plant in Niederlangen. With us you get a real 'Made in Germany'.
Is the offer aimed only at traders or also at private individuals?
Even if our products are mainly used in an industrial environment, we naturally also offer them to private individuals.
Just give us a call or send us an enquiry and we will be happy to contact you.
Will I receive a drawing before production starts?
In any case. To ensure that you get the product that you really want, we provide you with an approval drawing before production begins. In addition to the actual product, this also includes the installation situation. As the saying goes, a picture is worth a thousand words.
Can I get a CAD model?
After ordering and the design phase, we are pleased to provide you with CAD models. Data exchange is possible in all common formats, including .stp, .dxf, .dwg, etc.
Where can delivery of the products be made?
We produce our lift tables and column lifts in accordance with European standards and guidelines. Accordingly, our sales area is limited to all countries that recognize these standards and guidelines (e.g. the members of the European Union, Switzerland and Australia).
For which countries is the assembly service available?
On request, we assemble our systems throughout Germany, as well as in the neighboring countries of Germany.
